Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Venting and combustion
hot_rod
Member Posts: 22,833
in the Febuary issue of JLC. Written by Rudy's cohort Bob Dwyer, a tech trainer for Bachrach and Mark Gromley of Montana's Northwestern Energy. Glad to see this info and scary pictures :) in a contractor based mag.
Gc's and handymen need to be shaken up by this article.
It gets into vent problems and corrections, causes of backdraft, combustion analyzers, and more. A good article to keep and review.
Used to be free at www.jlconline.com. Cost ya 5 bucks now for the download. Buy the mag for the good pics, however.
Well done gentlemen!
hot rod
Gc's and handymen need to be shaken up by this article.
It gets into vent problems and corrections, causes of backdraft, combustion analyzers, and more. A good article to keep and review.
Used to be free at www.jlconline.com. Cost ya 5 bucks now for the download. Buy the mag for the good pics, however.
Well done gentlemen!
hot rod
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream
trainer for Caleffi NA
Living the hydronic dream
0
Comments
-
What is JLC
and how do I get it??0 -
JLC =
Journal of Light Construction. Siggy writes for them on occasion.
Available at your local magazine rack.
ME0
This discussion has been closed.
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 421 Carbon Monoxide Awareness
- 81 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 893 Plumbing
- 5.9K Radiant Heating
- 379 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements