Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Dirty sight glass after new radiator installed
rathernotsay
Member Posts: 6
We had a small cast-iron upright radiator installed y'day and now our boiler's sight glass is very dirty. We've flushed the boiler water twice (was black) and the water is better, but the sight glass has scum stuck to it now. Is this normal with a new radiator? Any tips on cleaning the sight glass?
0
Comments
-
Normal
Normal, skim the boiler and use colloid treatments.0 -
The glass
Forgot this question.
Take it out and use a small bottle or a nipple brush on the inside.0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements