Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

zone-a-matic heating

Darren Beeler
Darren Beeler Member Posts: 2
in THE MAIN WALL
The problem I am having is that I am having to manually turn the open and close valves with a screwdriver to get the boiler to ignite. It't not the thermostat because it still regulates temp, but boiler will run nonstop unless I shut off entire unit. Then when it cools down I have to turn open and close valves agian to ingite. Any help would be great. Thanks

Darren Beeler

Comments

  • Darren Beeler
    Darren Beeler Member Posts: 2
    zone-a-matic heating

    The problem I am having is that I am having to manually turn the open and close valves with a screwdriver to get the boiler to ignite. It't not the thermostat because it still regulates temp, but boiler will run nonstop unless I shut off entire unit. Then when it cools down I have to turn open and close valves agian to ingite. Any help would be great. Thanks

    Darren Beeler
This discussion has been closed.

Categories