Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

phase 3

Bill_4
Bill_4 Member Posts: 16
in THE MAIN WALL
Ive got a customer with a Phase 3 hot water maker, if its not used for awhile there is no hot water,but if he lets it run for awhile eventually its runs normally,any ideas? Bill

Comments

  • hot_rod
    hot_rod Member Posts: 23,185
    Bad aquastat...

    Sounds like the aquastat is sticking. Try replacing it with a better one and see if it clears up.


    Warm Regards,

    heatboys friend, ME

    "Expert in Silent Warmth" ™

    (Betcha HB's wondering how the heck I stole his motto and logo...)

    ME
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
This discussion has been closed.

Categories