Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Indirect water heaters - WHICH ONE?
Options

Bill T.
Member Posts: 1
I'm looking for recomendations on a good stainless steel indirect water tank for residential use (40 to 50 gal. size). I'm looking to install one that will provide many years of trouble free operation. What is a good one to get? Have heard some good and bad regarding Phase III. Any thoughts? Also, any thoughts on the Crown Mega-Stor? Are they all basicly the same or is there a clear favorite? I appreciate any feedback. Thanks
0
Comments
-
I use the crown mega-stores all the time its a great unit.
To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"0 -
Indirect hot water heaters.
I personally do alot of work for the Crown people and can highly recommend their product.
They are good people and stand behind their products. Just make sure everything is installed correctly.
To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"0
This discussion has been closed.
Categories
- All Categories
- 87K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 58 Biomass
- 426 Carbon Monoxide Awareness
- 116 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 109 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 991 Plumbing
- 6.3K Radiant Heating
- 389 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 48 Job Opportunities
- 18 Recall Announcements