Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

AMERICAN STANDARD OIL BURNER

Options
eric_2
eric_2 Member Posts: 148
in THE MAIN WALL
Customer needs parts breakdown for the burner.

Comments

  • eric_2
    eric_2 Member Posts: 148
    American Standard Oil Burner

    Would any of you techno-junkies have information on an American Standard Arco Flame oil burner that's about 70 years old according to my customer. It's a model # CF7, ser # T11. Any info is always appreciated but he's looking for a parts breakdown. Thanks again.
  • Firedragon_4
    Firedragon_4 Member Posts: 1,434
    What specifically are you looking for?

  • ed wallace
    ed wallace Member Posts: 1,612
    am. standard

    why is he tinkering with it hope hes not heating his house with it

    To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"
  • Glen
    Glen Member Posts: 854
    Change it out!

    for a new burner, reline the comb chamber etc. If you want to pay the shipping :-) - I have one complete in the shop - it works too - if you don't mind the pattern of flame to impinge dead right in the combustion chmaber. It should be in a museum.
  • eric_2
    eric_2 Member Posts: 148
    My opinion

    exactly. Why bother with the old beast at this point. It owes you nothing but I promised my contractor I would find out what I could. Thanks for the help.
This discussion has been closed.

Categories