Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Heat exchanger access covers

Tom Sholl
Tom Sholl Member Posts: 2
in THE MAIN WALL
Many oil fired hot air furnaces have heat exchanger access covers, one on each side of the unit, about 2 3/4" in diameter with a recessed center and a 1/4" "T" bolt through the middle. I can't locate any suppliers who can provide me with new replacements. There are lots of older furnaces out there with covers that need new ones.
Thanks for any suggestions.
Tom Sholl Plbg&Htg

Comments

  • B. Tice
    B. Tice Member Posts: 206
    Covers

    Tom, these are available from Sid Harvey's (Heil part#), or RE Michel Co. (as a Bard part #). Or I guess any ICP or Bard distibutor if you can get them to look up P/N. They all are interchangable.
This discussion has been closed.

Categories