Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
No more torches
Eric Taylor_3
Member Posts: 27
Hi all,
Just found this site:
http://www.ameritherm.com/index.html
Imagine soldering a 1" pipe joint in less than 10 seconds with no flame at all. The equipment is probably a bit on the costly side, but think of the savings in labor!
Eric
Just found this site:
http://www.ameritherm.com/index.html
Imagine soldering a 1" pipe joint in less than 10 seconds with no flame at all. The equipment is probably a bit on the costly side, but think of the savings in labor!
Eric
0
Comments
-
brazing video
Check out the video in the brazing section.
It's like magic!0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 915 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements