Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
steam traps
NEMSI
Member Posts: 2
This week i found myself at Trinity college replacing 130 steam traps,F+T,thermostatic,inverted buckets,all kinds of contraptions. I have eight left to do tomarrow four of them are warren webster 026-t drip traps 15 psi with a therostatic disk on the top and float assembly in the bottom they are piped to a cast iron heat exchanger six feet high and twelve feet long in an huge air handler. Can any one tell me how to get the thermostatic disk out of this thing and if so can i buy the parts to rebuild it.
0
Comments
-
Try
Barnes & Jones
www.barnesandjones.com
or Tunstall
www.tunstall-inc.com
Both have online catalogs in which you should be able to find what you need.
To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 913 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements