Draft Gauge

Wayco Wayne

Could someone recommend what they prefer. I cheaped out last year and bought a Bacarach combustion analyzer that had everything but a draft gauge. (My Scottish Heritage bites me on the **** sometimes) Yesterday I needed one. Also what do you guys use to seal the hole in the vent connector after yu test?? WW

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=255&Step=30">To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"</A>

Joe Grosso

draft gauge

Wayne I use the hand held one from Bacarach the mzf if I remember right.It is small and does the job.I believe around 70 or so.

ed wallace

draft gauge

themzf works fine for sealing holes a small bolt or screw works fine in a pinch furnace cement works

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"