Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Relays used with an Erie Boiler Boss
Erik Simon
Member Posts: 1
A friend has given me a new Erie Boiler Boss 2400 that I would like to install. However, the specs say it only supports 3 zones. I currently have 5 zones (circulators not valves). But it appears that I only have 4 relays (It looks like the original install left one zone unattached...no wonder the basement is always so cold.)
So, I want to install the Boiler Boss and new relays (to supprt 5 zones). Can I use the Boiler Boss, and if so, what sort of relays should I use? Also, should I use the Boiler Boss, I saw a post that made me concerned about the reliability.
Thxs,
Erik
So, I want to install the Boiler Boss and new relays (to supprt 5 zones). Can I use the Boiler Boss, and if so, what sort of relays should I use? Also, should I use the Boiler Boss, I saw a post that made me concerned about the reliability.
Thxs,
Erik
0
This discussion has been closed.
Categories
- All Categories
- 85.9K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 420 Carbon Monoxide Awareness
- 78 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 94 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 59 Pipe Deterioration
- 883 Plumbing
- 5.9K Radiant Heating
- 377 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 40 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements