Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Faulty Boiler Controls-Boiler Boss 2400
Rick-LG Plumbing
Member Posts: 2
I've not had much luck with Erie's Boiler Boss 2400. I've had two jobs in which I've installed these controls only to have the Priority circut fail in less than one year. In both cases the Boiler Boss controls were replaced under waranty. In less than one year the priorty circut faied again on both the replacement units! What to do? I was wondering if anyone has had a simular experience.
Thanks Rick
Thanks Rick
0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 913 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements