Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
New Install today
Joe Grosso
Member Posts: 307
Here is todays job.Took out a repco what a piece of junk.We installed a WM gold 4 section with three zones and a amtrol 41 gallon indirect with a anti scald valve.
0
Comments
-
Nice work Joe
There gonna see a huge drop in the oil bill this winter from converting from the old Repco tin can . I see you ran the smoke pipe off the back of the boiler . Any reason why the top outlet wasnt used ?0 -
Ron
If I ever have to clean the unit it just makes servicing it easier.I doubt it with the riello.I like this setup it is sweet.Have plenty of these over past 5 plus years and have not cleaned one yet.But you never know.Every install I look at servicing because I am the one that will being doing the servicing.0 -
Nice job Joe.0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 913 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements