Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

check this out

ScottMP
ScottMP Member Posts: 5,883
in THE MAIN WALL
That particle board is tough to drill thru ....

LOL

Scott

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=237&Step=30">To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"</A>

Comments

  • EricR_2
    EricR_2 Member Posts: 43
    Not my employee

    What not to do!
  • Mark_4
    Mark_4 Member Posts: 13


    Is that for real? Or did you doctor that immage? lol Tops a former employee of mine who fixed a leaking B&G circulator with lots of white silicine at the weep hole in the bearing assembly.
  • hot_rod
    hot_rod Member Posts: 23,404
    Thats a HX !

    to pre-heat the water to the shower valve via the shower drain water ;) Great idea, so simple.

    hot rod
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • munchkin-man
    munchkin-man Member Posts: 247
    forgot to seal off the holes the pipe goes in with silacone

This discussion has been closed.

Categories