Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Schluep fittings for Kitec
Options
Steve Minnich_1
Member Posts: 127
Schleup fittings are the goods on PAP. I'm committed to them.
Steve
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=263&Step=30">To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"</A>
Steve
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=263&Step=30">To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"</A>
0
Comments
-
Schluep fittings for Kitec
Anybody had any experience with Schluep fittings and Kitec Pex-Al-Pex?
Biro0 -
yes
we sell a lot of schluep fittings with Weil McLain Alumipex (PEX-AL-PEX). The 1/2" 14000 fittings work extremely well. The 5/8" with 15000 fittings are a little tight. For 3/4" Weil we carry a 25mm tool (different from the other schluep tools) that takes a little longer but works really well.
Michael Bleier
Able Distributors
"The Supplier That Works With You"
www.abledistributors.com0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 848 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 48 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements