Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
level? I don't need no stinking level!
Dave Palmer
Member Posts: 186
a tape measure,it ain't going to run no better,and don't be wiping those fittins that wastes time and the extra sodda holds them betta.And why can't I run 4 3/4" zones on 1" pipe?They get hot don't they?............. this lovely job was done by a gas company meter hanger,he was a contractor on the weekends,the horror.Can't wait for the boiler to die so I can repipe it.You can't see in this photo but the transformer is a doorbell transformer nailed to the joist
0
Comments
-
I'd love to
see some more photos from that job, but that one is making me so dizzy i might fall out of my chair. I guess he could blame it on the fitting manf. if you should'nt use them by the box why do they sell them by the box? or maybe they should put piping instructions in with pipe?0 -
fire
must have been bending over to light his cigarette
when his 12a tip turbo torch was burnig up yhe floor
jim f.0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 913 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements