Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Boiler Boss relay
nick z.
Member Posts: 157
I only installed one about 5yrs. ago.People called yesterday with trouble of getting heat in zone with the stat all the way down. Relay wasn'tpulled in and circ. wasn't running so I worked the handle on the flow valve and beat on it with a hammer.People called back today to say heat was working fine but they had no hot water. (phase 3 inderect) When I got there, the circ. on the inderect was running and all controls were working fine. And of course they they had hot water. My question is are those realys known to be trouble? Thanx Nick
0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 88 Chimneys & Flues
- 2K Domestic Hot Water
- 5.3K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 910 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements