Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Blueray III Afterburn
Marty handyman
Member Posts: 4
I posted 'Blueray acting up' on 11-3. Blueray III is not a blue-flame boiler, & was made for Blueray by Thermodynamics. Advice led me to suspect inadequate ventilation [I had closed a vent off]. When I cleaned I found oil crystalized on nozzle, & spilled back past nozzle, & system sooted pretty badly. Afterburn was lasting about a minute. Now I have whiter flame, & a very minor afterglow.
Possible fuel pump acting up? Or just ventilation problem?
Possible fuel pump acting up? Or just ventilation problem?
0
This discussion has been closed.
Categories
- All Categories
- 86.4K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 94 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 926 Plumbing
- 6.1K Radiant Heating
- 383 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements