Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Just finished this..................(hb)

heatboy
heatboy Member Posts: 1,468
in THE MAIN WALL
This is that project we had discussed months ago. First my price was too high then I lowered the price, but ultimately we settled on a price that was 11K higher than my original numbers. Go figure!

This project has 4 zones of radiant (slab and joist bay) and 2 zones of fin tube baseboard. Dual Roth fuel tanks supply the fuel to the Vitola VB2-22. 5,000 square feet of heated area. This client is an engineer for Air Products so I was quizzed on a daily basis ;-) All in all, great guy and profitable project.

PS. I wish I could get Danfoss to make panels with Viessmann controls! I would buy every one they make.

Warm Regards,

heatboy

climatecadvanced.com

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=103&Step=30">To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"</A>

There was an error rendering this rich post.

Comments

  • leo g_16
    leo g_16 Member Posts: 1
    as usuall

    heatboy, superb! was just wondering if you have seen the circ flanges with the screw-nut ball valves? no wings or levers!

    leo g
  • keith
    keith Member Posts: 224
    Looks great

    Nice touch with the diamond plate. Craftsmanship if there ever was. Whose burner do you provide with that set up? Looks like a servicemans dream come true.
  • J.C.A.
    J.C.A. Member Posts: 349
    An Engineer ?

    You hit the motherlode HB ! He'll be bringing all his guest to look at the "work of art " in the basement . Nice job ! Chris


  • Mike Kraft
    Mike Kraft Member Posts: 406
    The Motherlaod!!!

    I love that one Chris:)And Jeffrey........lovely work.And just think of all the mental stress when you were tilling this job!If they'd only believe in the begining;)

    cheese
  • Cosmo
    Cosmo Member Posts: 159
    Awesome!!

    The diamond plate is incredible! I never thought of it, I was thinking of using some stainless steel sheet for a project I am working on now. Your an inspiration. I had the same thing going on with a job I did earlier this year. He is an electronic engineer.... I went to his house on a service call to repair the a/c system, and ended up crunching cfm, btu, gpm, fpm, system efficiency vs. combustion efficiency numbers with him for almost a month. Finally I ended up doing 17k of work.... Engineers might be a pain at first, but if they just want to test our competancy, and are willing to pay for a good job....these engineers can be our best customers! Never mind my father who always said they are just "educated idiots".....

    Cas
This discussion has been closed.

Categories