Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Cast Iron Radiators
Options
Dez
Member Posts: 1
Looking to sell two cast iron radiators in NYC area. Dim. are as follows: 36 1/2"W X 26"H X 8"D (W/14 SECTIONS), 33"W X 26"H X 8"D (W/13 SECTIONS). Does anyone know of a company or contractor that buys them?
0
Comments
-
This is as good a place as any to move them.
You may want ot reset this advert Friday evening and see if it gets a response over the weekend! Good luck other wise they are scrap. bigugh0 -
Contractors
Do not usually pay for used radiators. Removing them from the house is usually pay enough. If they really need one for a job you might get $20. bucks. "If they're free, they're for me!" Other than that good luck. For scrap you might get a 1/2 a penny per pound. Brand new they are worth almost $30.00 per section, or more. I have 25-30 of'em in my garage. I don't part with them for less than $50. each. You just have to find some one who really needs one. Good Luck.0 -
Check with local supply houses,some will pay for good ones
0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements