Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Wirsbo presure test kit
Jamie_6
Member Posts: 710
How do you hook up the presure test kit to the manifold? I have always build my entire manifold (w/ copper) and tested it all.
Do you have to use an 1 1/4" coppler on the one side?
Do you have to use an 1 1/4" coppler on the one side?
0
Comments
-
i put a 1/2\" tester
in the ips tapping for the temp. guage right on the manifold. bobTo learn more about this professional, click here to visit their ad in Find A Contractor.0 -
test kit
The Wirsbo test kit is for mounting on their brass manifolds.0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 913 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements