new munchkin - scott

ScottMP

In with the new.

Had a customer that was told by another contracter that the 399,000 input, 267,000 out, boiler he had would need two small boilers to replace it.

I told him it did'nt sound right and did a complete heat loss. Guess what, 130,000 demand. They also had a real problem with make up air. SOOO...

We put in a Munchkin 199 and sat it on a Buderus 50 gallon indirect to replace the old 50 gallon HWH they had.

Nice system, lots of room and no more make up problem. A little knowledge is a nice thing ;)

This is the new system and the other photo is what we replaced.

Scott

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=237&Step=30">To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"</A>

Unknown

Hey Scott....

I noticed that it is right near the window. Will you and the boys be having guided tours for customers and they can look in the window and see your excellent work. Maybe in November we could all rent a bus and go by. Maybe the wives could include that on their tour.... then again maybe not although you never know!!!!

HBW

Buderus

Hey S Milne,

Why didnt you use a matching buderus gas boiler ???

ScottMP

Direct vent

Was the game here, to eliminate the make up air problem.

The new Buderus direct vent sealed combustion did'nt have the btu's to cover this job. Thats why we went to the munchie.

Scott


To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

Unknown

Nice work Scott

I see youre following instructions not alot of installers seem to know - giving 12 inches between the circs and flowvalves .

Speaking of trying to follow instructions , whats the deal with the piping diagram on the outside of the Taco airscoop box ? They dont include the minimum distance to the airscoop on the box of either the 3 inch or the 1 inch , which we used recently . But they do tell you its 18 inches minimum , On The Flowvalve Box ? Kind of weird . Great work again Scott .

Mark J Strawcutter

different perspective

I looked at it from the other side - a boiler room with a view!

Or perhaps it was installed as a conversation piece in a corner of the basement family room - it's certainly attractive enough for that.

mark

Mark Hunt

VERY NICE!!!!!!!!

These people will be very happy with that system!

Nice work Milne!

Mark H

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

ScottMP

Thanks Ron

Always nice to have a compelment from You .

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

ScottMP

Thanks

Hunt !!



To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

Cosmo

Did'nt know...

About the space required between pump and flowcheck, is it so it doesn't receive turbulent flow, and vibrate?


Cas

Online Sheriff \"Murph\"

nice job scott

keep em' warm and happy!!


did they get free lolly-pops??

ScottMP

Nope

Just a bill !!!

Maybe next one gets a bad of doughnuts

Scott

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

Mike Kraft

Good morning Mr.Scott!

I must say,it must be a great feeling to show up with a measuring tape and a notebook to show what a heat loss is!The other bidder was twice the load.The HO must be very very happy he contacted you.

And whatta match eh:)........call it a Mooderus? Very clean install and as mentioned.........a room with a view!Keep it up.

cheese

Wayco Wayne

Gorgeous work

I love the idea of putting the Munchie on the buderis Indirect. Small footprint and you get the condensate nice and high. Wish I'd thought of it. Wayco Wayne