Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Steam unit heaters
todd s
Member Posts: 212
I need some help sizing these units for a boiler replacement. The system is a 1-pipe steam connected to 3 unit heaters. There are no radiators at all. Two of these units are ILG and measure 22x19x5 and one is an American Blower measuring 24x24x12. If we can't find the EDR of these can we figure out sq ft steam by the model of the old american standard boiler? I would rather not use method two. Thanks in advance.
0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 913 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements