Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Panel Radiators & Radiant Manifolds

Options
Rich_3
Rich_3 Member Posts: 13
in THE MAIN WALL
I have installed the panel radiators using a flow-tee system off of a copper 1" or 3/4" main. I was told about using a manifold instead; it is much quicker and easier and provides the same results. I would like to know more, any and all inputs are greatly appreciated. I figure you size it like you size a regular boiler header, but I am not 100% sure. I will be using 5/8" pex to each radiator.

Respectfully,

Rich

Comments

This discussion has been closed.

Categories