Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Runtal or mysonic

John_3
John_3 Member Posts: 6
in THE MAIN WALL
Any info regarding integrating Runtal or Mysonic with existing CI (vintage 1920's). Gas-fired hot water. Any ideas? Compatible or not?


Thanks,
Nancy

Comments

  • Paul Pollets
    Paul Pollets Member Posts: 3,662
    Steel panel rads

    like Runtal or Myson work well with cast iron radiation. We always install TRV valves on all the radiators to balance the systems and make it easy to control. we like to use an outdoor reset control that provides constant circulation and boiler protection from thermal shock.

    To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"
  • Dave_4
    Dave_4 Member Posts: 1,405
    i picked myson because they came in brass..but...

    they came from the UK & had non-standard threads...it took a lot of wraps of pipe tape & i still have 1 out of 11 that gives me 3 or 4 drips per week....i hear myson offers std american NPT threads these days
This discussion has been closed.

Categories