Old wall hung Radiators

Andy Morgan_2

I am doing a new home and the homeowner purchased old radiators for me to install. Question is, I need one inch and a half left handed plug. Does anyone know where I can get one?


Thanks
Andy Morgan

J.C.A.

ASK

Dan ... He wrote an article about finding old stuff . My memory is in shambles , but I believe it was Utica . They were the only makers of these kind of relics. Good luck !

DanHolohan

that was

Starbuck's but it's gone now.

Jim_22

left hand plugs

In the past, we have purchased a set of "Ridgid" 1 1/2" left hand dies, and made left by right close nipples which can be treaded into the radiator and then capped with a standard cap. Not pretty but they work.

Good luck.


p.s. everyone should read Dan's story on Starbucks! I re read it every couple of months. Wish I could'a seen it.

Cheers!

Dan Peel

Melted down..

And sold as coffee........... Dan

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

Dave Yates (PAH)

we

work closely with a local machine shop for odd ball items. Not cheap, but a real life safer. He can make anything needed!

We just had the same problem on a job, but one of the scrap rads had reverse nipples we were able to salvage and reuse.

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"