Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Tool for stapling PEX to blue foam . I have read on this Wall
Steve Bergstrom
Member Posts: 19
I have read on this wall of a staple that will hold down the PEX to the foam so it won't float up when the concrete is placed.As i recall there is also a tool avaliable for installing the staples while standing up.
Could one of you Wallies give me advice on where i can buy such staples and the tool that install these staples.
T.I.A. Steve
Could one of you Wallies give me advice on where i can buy such staples and the tool that install these staples.
T.I.A. Steve
There was an error rendering this rich post.
0
Comments
-
Staple down to foam board
Check out the Watts-Radiant # P667400 foamboard stapler, and the 1.6" or 2.4" staples that are available. My clients swear by this. See page 45 of their 2002 Radiant products catalogue.
Regards, NelsThere was an error rendering this rich post.
0 -
Wirsbo
also has a stapler for foam, and it works fabulously on the foil/foam or foil/bubble products. Costs about three hundred bucks, but how much is a new back and pair of knees worth? Not to mention it's FAST! Call your Wirsbo rep and ask for the foam stapler. I guarantee you'll like it. Kevin0 -
On bubble wrap?
Thanks, I didn't realize that.
It works GREAT on the foam especially 1" & 2".
Those fish hooks style staples really grab.
0
This discussion has been closed.
Categories
- All Categories
- 86.4K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 94 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 925 Plumbing
- 6.1K Radiant Heating
- 383 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements