Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
monoflow vs venturi
Options
Mark J Strawcutter
Member Posts: 625
ran across this page:
<a/href="http://www.legendvalve.com/heatingvalves.htm">
http://www.legendvalve.com/heatingvalves.htm<a/>
at the bottom are two types of tees - mono-flow and venturi. I see the physical difference, but what is the functional difference between the two?
Mark
<a/href="http://www.legendvalve.com/heatingvalves.htm">
http://www.legendvalve.com/heatingvalves.htm<a/>
at the bottom are two types of tees - mono-flow and venturi. I see the physical difference, but what is the functional difference between the two?
Mark
0
Comments
-
Nope
Different designs to accomplish the same thing.Which is as we know to create a pressure drop and allow some flow to be diverted from the main stream!Another tee is the "Thrift" or "scoop" tee.
cheese0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 39 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements