Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Need help
Rob_2
Member Posts: 2
have a moduler building with two wall mounted a/c's by Bard but the people who owned the thing before me painted or scraped of the tags with the numbers on them. I need a new compressor but have no numbers to go by.
0
Comments
-
Just a thought
You might be able to get a number off the actual compressor?
Your friend in the industry,
Alan R. Mercurio0 -
Shoot
I hate when that happens,How about the tag on the compressor
If its there you can call the manufacture and they should be able to help.I would ask if it had an expansion valve
but its a wall hung so properly not.Last resort run a load calculation. don0 -
Thanks guys
I'll try that0
This discussion has been closed.
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 420 Carbon Monoxide Awareness
- 80 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 891 Plumbing
- 5.9K Radiant Heating
- 378 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements