Thermal cam... hr

hr

Here is the next step for my hx project. As luck would have it Watts Radiant has a new T drill copper spinner. They spun this 2-1/2" copper closed for me. I found out that a T-Drill will not pull this much "bunched up" copper. So I will just silver solder the connection. Taco flanges will allow me to mount the HX to the tank.

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=144&Step=30">To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"</A>

chris smith_2

silver solder

hor rod,
are you still using silver solder, i've gone to the phosfer bronze stuff for anything thats not potable ;15http://www.jwharris.com/home/ 15% silver/
cheaper and no flux

chris smith