Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

A valve for the injection bridge

hr
hr Member Posts: 6,106
Siggy showed me one of these recently. You set the GPM and read it in the window. A simple accurate way to set the injection flow. This one is from the Watts Radiant catalog. www.istec-corp.com has them also.

hot rod

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=144&Step=30">To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"</A>

Comments

This discussion has been closed.