Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
backflow certification

HeavyP
Member Posts: 52
Does anyone know where I can get certified for New York State? Or anyone who would know this information. I would prefer Westchester County, but will travel if I have to.
0
Comments
-
certification
Your local water company should have the necessary information. Ours decided that they would require certification through the New England water Works Association (www.newwa.org) and we attended a three day certification course that included a hands-on lab. One of the few courses I've ever taken that was based on field knowledge with real-world application. The hands on lab was very benificial in that there were a wide variety of backflow preventers set up in a working mode. After the first hands-on session, all were set up with various malfunctions and we were scored on determining the problems.
If your local water purveyor is in the dark, the NEWWA can provide dates & times & locations for certification.
To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"0
This discussion has been closed.
Categories
- All Categories
- 86.8K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 107 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 104 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 954 Plumbing
- 6.3K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements