Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Bens supports for pex hot rod

hr
hr Member Posts: 6,106
in THE MAIN WALL
To neaten up the pex sweeps into this manifold I used some short pieces of Pex al pex to form sleeves. I like the flex-ability of regular pex for pulling thru, but the pap makes for a nicer job at the manifolds and near boiler piping.

hot rod

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=144&Step=30">To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"</A>
This discussion has been closed.

Categories