Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Trinity Boiler- Steve Murphy
Steve M
Member Posts: 26
The local rep came by this morning to show us this boiler made by NTI. It is supposed to be the Munchy Cruncher. The rep had no knowledge of an actual installation so he could not give us a performance history. Have any of you used or seen this piece of equipment? Websight is www.nythermal.com
Thoughts? Comparisons to Munchy?
Thoughts? Comparisons to Munchy?
0
Comments
-
Trinity Boiler
We were shown this as possible sellers for our area, and it does appear to be a good potential product. The technology is to be licensed from the same group that licensed the Munchkin, so it should be OK. We like the metal jacket versus the plastic one on the Munchkin, as well as the wall hung type of installation. Price is a lot better also-as are freight terms. The current lack of ASME certification - to be made available in 3-6 months will not allow us to sell it commercially though. There are no installations in our area to report on unfortunately. Good luck!0
This discussion has been closed.
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 420 Carbon Monoxide Awareness
- 80 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 892 Plumbing
- 5.9K Radiant Heating
- 378 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements