Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Radiators
J.J. Wanzie
Member Posts: 1
Does anyone know the B.T.U. ratings for the radiator made by A.A. Griffing Iron Co. of New York manufactored about 1874? See attached photo.
0
Comments
-
Radiator rating
If no one has this, I do have a IBR book that list ratings by # of columns x # of sections x height if this helps email me those and I will give you sq.ft. of radiator.0 -
\"Every Darn Radiator\"
Have you tried Dan's book " Every Darn radiator" ? It's the next one I'm gonna buy. If it's anything like the others it will be worth 10x what I pay for it.
Regards,
Robert O'Connor0 -
Bundy radiators
That's what you've got here. N.J. Bundy was long affiliated with the A.A. Griffing Iron Company of Jersey City, NJ (they made radiators for a lot of companies).
The ratings on these are easy to remember. One linear foot on each of those loop tubes equals one square foot EDR.
You got the right questions, we've got the right answers!Retired and loving it.0
This discussion has been closed.
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 421 Carbon Monoxide Awareness
- 81 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 893 Plumbing
- 5.9K Radiant Heating
- 379 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements