Welcome! Here are the website rules, as well as some tips for using this forum.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Primary/Secondary Piping Required w/Caleffi 280?
Hello. I’m wondering how necessary primary/secondary piping is in home heating systems when a “smart” valve such as the Caleffi 280 Thermo-Protec is part of the system.
My heating system:
- Weil-McLain WGO4
- residential
- one zone
- hydronic
- conventional "non-condensing"
- oil fired
- hot water
- cast iron radiator
- converted legacy gravity heating system
- with original overly large supply piping remaining in place
The Weil McLain Manual appears to show primary piping in combination with manual valves in its installation instructions.
Question: If a Caleffi 280 Thermo-Protec “smart” valve (along with another circulator) is installed in my heating system will that eliminate the need for primary/secondary piping?
Thanks in advance for help with this.
HomeOwner 7
Categories
- All Categories
- 87.9K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 136 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 80 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.2K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 52 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements

