Welcome! Here are the website rules, as well as some tips for using this forum.

Need to contact us? Visit https://heatinghelp.com/contact-us/.

Click here to Find a Contractor in your area.

If our community has helped you, please consider making a contribution to support this website. Thanks!

Burnham Series 2(B) overdue service - recommended part replacements & brush?

Options
rossn
rossn Posts: 162
edited November 13 in THE MAIN WALL

I have a 1999 Burnham 208NS-TEI5 (natural gas, electronic ignition). I've massively neglected it, and it hasn't been serviced in eons.

I'm going to do a basic service on it - cleaning the burners, brushing the flue passageways, looking for anything odd.

  1. Are there recommended parts I should replace? (hot surface ignitor or pilot assembly, flame rollout switch, etc?)
  2. What type, size, length of brush is typically needed to clean its flue passageways? I'll probably be ordering from supplyhouse.com
  3. What else? I wasn't sure if burner adjustment required a combustion analyzer or similar.

Tips on what I should be inspecting or servicing are also welcome.

Many thanks!

Categories