Welcome! Here are the website rules, as well as some tips for using this forum.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Wayne Burner Air adjustment problem
Servicing an oil, Wayne MSR burner on a Bock hot water heater. apparently the last tech pulled the inner and outer air bands and reassembled them incorrectly. when I try to reduce the air intake, one slot closes while the other opens, basically not changing the O2 in the analyzer at all. I downloaded the manual but don't see any information about the proper configuration of the two bands.
I'm going to call Wayne tomorrow but thought I would check in with the brain trust first.
Comments
-
-
What size water heater? What size nozzle?
The 32E wants a .75 @ 100 psi. The 51E wants a 1.00 @ 100 psi. Does the burner have the Bock sticker on it showing its a package burner for that water heater?
0 -
I believe the model number for the burner is the Wayne MSR if that's any help.
0 -
Yes it's got the Bock label on the burner. The nozzle and pump pressure are correct as per the service label on the hot water heater.
0 -
What are the combustion numbers you're getting?
0
Categories
- All Categories
- 87.9K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 135 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 80 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.2K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 52 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements
