Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Heat Timer InjectTemp
Options
Alan (California Radiant) Forbes
Posts: 4,874
Does anyone have the installation instructions for this control?
8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab
Two btu per sq ft for degree difference for a slab
0
Comments
-
Looks like they will supply you old manuals?
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
I called technical support = nada.
8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab0 -
does it control a variable speed pump? Or a basic valve injection?
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
Valve
8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab0 -
Whats wrong with it? taco i series 2 way injection valve is a good replacement option i’ve used to replace these heat timer valve setups..
1 -
1997 vintage controls? Might be time for an overall upgrade?
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream
2
Categories
- All Categories
- 87.8K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 133 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 79 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.1K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements