Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Warehouse Clearance – 60,000 Feet of PEX-AL-PEX Hydronic Heating Pipe

Options
Pipe_Guy46
Pipe_Guy46 Member Posts: 5
edited July 7 in Buy, Sell, Barter

Warehouse Clearance – 60,000 Feet of PEX-AL-PEX Hydronic Heating Pipe

We're looking to sell our entire inventory of new PEX-AL-PEX hydronic heating pipe in one transaction.

Inventory Available

  • 40,000 ft. – 3/4" PEX-AL-PEX
  • 20,000 ft. – 1" PEX-AL-PEX

This is new, unused inventory and is priced to move. Our preference is to sell the entire lot to a single buyer, so we've priced it accordingly.

This is an excellent opportunity for a distributor, supply house, mechanical contractor, or surplus dealer looking to add inventory at a substantial discount.

If you're interested, please call or email me to discuss pricing, inventory details, or to make an offer.

Jarrod Prifogle

(937) 839-4608 x 118

jprifogle@rexarc.com

Rexarc International

Comments

  • HydronicMike
    HydronicMike Member Posts: 382

    Sounds like you're just a guy selling tubing. NO Full name, NO company, NO address, NO Business phone number?

  • Pipe_Guy46
    Pipe_Guy46 Member Posts: 5

    Hydronic Mike, I have updated my post with the information your were looking for! I apologize, I have never posted anything on this site, and didn't know what to expect.

    GGross
  • Steamhead
    Steamhead Member Posts: 18,740
    https://forum.heatinghelp.com/discussion/comment/1899730#Comment_1899730

    What brand is the pipe?

    All Steamed Up, Inc.

    Baltimore, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting

  • Pipe_Guy46
    Pipe_Guy46 Member Posts: 5

    This is the Rexarc brand — we call it RexFlex. It's structurally the same as the 5-layer pipe you'd buy from the big wholesalers and distributors.

    If you'd like to go into more detail, I'd love to hop on a call and talk it through. And if you think it could be a good fit, I'm happy to send you a free 50 ft roll so you can put the actual piping in your hands.

  • hot_rod
    hot_rod Member Posts: 27,911

    Is this a compressed air tube? Got a pic of the listings printed on the tube? DIN 4726?

    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Steamhead
    Steamhead Member Posts: 18,740

    https://rexarc.com/

    All Steamed Up, Inc.

    Baltimore, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting

  • Pipe_Guy46
    Pipe_Guy46 Member Posts: 5

    Thanks for the link, Steamhead! The pipe looks just like the website shows. The difference is that on our website, it's listed for inert gas only.

    We received a shipment of HVAC non-potable PEX-AL-PEX, and rather than pay to ship it back, we're trying to find someone in the industry who could benefit from the considerably marked-down piping.

    Again, if you'd like to talk more about it — and if we think it's a good fit — I can put a sample roll in your hands!

  • Pipe_Guy46
    Pipe_Guy46 Member Posts: 5

    HOT ROD - This is what is printed on the pipe! The specification code is ASTM F1281

    HVAC - REXFLEX - 1.jpg HVAC - REXFLEX - 2.jpg
  • Ironman
    Ironman Member Posts: 7,934

    It looks the same as Roth which has been discontinued.

    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.

Categories