Drawing a blank, please remind me.....
Senior moment!? I need to order a copper fitting that is 1/2" male sweat X 1/2" male thread and can't remember what it's called!? Thanks in advance!
Comments
-
-
1/2” fitting x male adapter?
8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab
2 -
Thank you for the responses, correct me if I'm wrong, but I need male sweat, not female sweat
0 -
Male-street
0 -
-
Fitting adapter.
Baltimore, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting
1 -
Good ID from the "Steam Guys"! A "male fitting x street adapter". I couldn't pull that one out of my noggin.
0 -
Order it like this at the supply house. the manufacturers typically call them copper male street adapters or fitting adapters, the typical connection call out is fitting x male .
0 -
And we typically don't use copper………….
Baltimore, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0 -
male fitting adapter is what we call them
0 -
Bingo, thank you all ;)
0
Categories
- All Categories
- 87.7K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 430 Carbon Monoxide Awareness
- 127 Chimneys & Flues
- 2.2K Domestic Hot Water
- 5.9K Gas Heating
- 121 Geothermal
- 170 Indoor-Air Quality
- 3.8K Oil Heating
- 79 Pipe Deterioration
- 1.1K Plumbing
- 6.6K Radiant Heating
- 396 Solar
- 16K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 17 Recall Announcements