Well I'm doing it myself!
Had a quote for having a liner installed, $$$$. I had thought that since I am doing all of the boiler install, changing over from a coal stoker to a Weil-McClain CGa 4,I would save myself some effort and have the liner done. But after checking for material costs I can buy all the necessary components for about $$$. So am enlisting a few friends who have done there's to do the job.
And might take the savings and invest in a Tig welder that can handle aluminum!
Comments
-
Take some pictures to show us, please.
8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab0 -
I think you've been here long enough to know that pricing can not be discussed here
1 -
I have only installed two liners but didn't have any bad issues.
0 -
This, @Cyclist77 , you need to remove the pricing. Now.
All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting1 -
I removed the pricing info, @Cyclist77. Please refrain from posting pricing/quotes in the future.
Good luck with your project! Like @Alan (California Radiant) Forbes said, feel free to take and share photos here along the way.
Forum Moderator
0 -
Sorry About the pricing . Lesson learned.
0
Categories
- All Categories
- 87K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 115 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 107 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 983 Plumbing
- 6.3K Radiant Heating
- 389 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 48 Job Opportunities
- 18 Recall Announcements