Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Burnham Hydronic Control Sage 2

creckles
Member Posts: 1
I have a Burnham Hydronic Control Sage2 . The new item worked nicely for a month and then the trouble started as display turns to red light- hard lockout . I tried resetting by turning unit on sand off and pressing reset button on control unit (hardwire lockout)-no change! I have since put old control unit in ,it works fine but every three days displays red soft lockout. I turn off unit and it runs well for another three day cycle…… yikes PLEASE HELP-thank you ,Steve
0
Categories
- All Categories
- 86.8K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 106 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 104 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 952 Plumbing
- 6.3K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements