Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

What type (part #) of HONEYWELL zone valve do I have? They are 25 years old.

mpmn04
mpmn04 Member Posts: 3
in Oil Heating
Zone Valve pic 1.jpg
Zone Valve pic 3.jpg

Comments

  • yellowdog
    yellowdog Member Posts: 257

    Look like standard V8043 zone valves.

  • Big Ed_4
    Big Ed_4 Member Posts: 3,150
    edited January 21

    The valve has a inverted flair pipe connection . Normally you would fine them on baseboard mounted locations as in apartment buildings . I replaced a few … Erie, Flair ??

    I don't see the need for removing the valve body with Honeywells , the powerhead , motor and valve workings are replaceable …

    There was an error rendering this rich post.

  • mpmn04
    mpmn04 Member Posts: 3
    edited January 22
    Screenshot 2025-01-21 204906.png

    Thank you for replying.

    Is this the valve I would need?

  • Big Ed_4
    Big Ed_4 Member Posts: 3,150

    What is the problem or issue ?

    There was an error rendering this rich post.

    mattmia2
  • mpmn04
    mpmn04 Member Posts: 3
    edited January 21

    Big Ed_4

    The zone valve motor quit. I replaced it with a used motor I had laying around and got it working again. I have 3 more valves in use that are just as old, so I want to be prepared for when they fail.

  • Big Ed_4
    Big Ed_4 Member Posts: 3,150

    Stocking a replacement powerhead would be a good idea, covers you for a bad end switch , gearing and motor …

    There was an error rendering this rich post.

Categories