Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Drop header

Options
2»

Comments

  • Mad Dog_2
    Mad Dog_2 Member Posts: 8,260

    That's how the Fire sprinkler shops make a solid profit: The pipe comes prefabbed & marked. A 638 B Shop Tech makes about 2/3rds less than an A Journeyman. Mad Dog

    Consulting by Mad Dog & Matt Jr.
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 18,170

    A 141 mounted on a #300 using the close coupled method works really good. You leave the threader mounted on the 300 so no lifting it up and down. I used to use the driveshaft over to a pipe vise and I have tried driving it with a 700.

    The close coupled drive is the best. Less wear and tear on the old body.

    Mad Dog_2

Categories