Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Last Weeks Oil To Gas Conversion

EzzyT
EzzyT Member Posts: 1,366
in THE MAIN WALL

We converted this system to gas and ripped out the old gravity system piping in the basement and plumbed a home run set up. Install this Energy Kinetics Frontier.

IMG_0158.jpeg
IMG_0156.jpeg
IMG_0419.jpeg
IMG_0381.jpeg
E-Travis Mechanical LLC
Etravismechanical@gmail.com
201-887-8856
delcrossvHVACNUTPaul S_3

Comments

  • EdTheHeaterMan
    EdTheHeaterMan Member Posts: 10,123

    That does not look like a WM Gold. LOL

    Nice work!

    Edward Young Retired

    After you make that expensive repair and you still have the same problem, What will you check next?

  • HVACNUT
    HVACNUT Member Posts: 6,574

    You need to explain the piping, please. It went from high mass rads, to ? Radiant? Home runs to existing? There's sensors because the T9 is in the equipment room?

    Nice work BTW.

  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 17,177

    Geez the old oil boiler looks brand new. Did they replace it just to change fuels? Or did it fail?

    mattmia2
  • mattmia2
    mattmia2 Member Posts: 11,725
    https://forum.heatinghelp.com/discussion/comment/1816070#Comment_1816070

    I was going to say the oil company must have really pissed them off.

  • EzzyT
    EzzyT Member Posts: 1,366

    Thanks all.

    The system is still cast iron radiators with some baseboard.

    The oil boiler was about 5 years.

    We replaced it with a Energy Kinetics Frontier with gas burner.

    E-Travis Mechanical LLC
    Etravismechanical@gmail.com
    201-887-8856

Categories