Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Control Board Not Turning On

Tlee8951
Tlee8951 Member Posts: 1
in Gas Heating

Hopefully somebody can save me on here. I recently got a Buderus GC144/4 Cast Iron Gas Boiler, 76,000 BTU. My plumber hooked everything up and I had a friend who works for Johnstone double check it but for some reason the panel inside will not power on. I've even purchased a new one and had it replaced. Still nothing. We tested and show power going on but it won't give a readout. Winter is coming sooner than later and I need this figured out.

IMG_20240825_150303.jpg

Comments

  • gyrfalcon
    gyrfalcon Member Posts: 181
    edited October 2024

    Here are a few screenshots from the Beckett control manual

    Some units have an optional on/off button

    IMG_1645.png
    IMG_1644.png
    IMG_1643.png

    Slant Fin Galaxy GG100(1986) , 2 zone hot water baseboard, T87 Honeywell thermostats. 
    GGross

Categories