Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Help Identifying Old Radiator

Paul_4
Paul_4 Member Posts: 7
Hi All,

I am trying to identify this radiator so I can determine the EDR. Can anyone help me identify it?

And, possible provide a cut that shows the EDR?

Thank You!


Comments

  • Steamhead
    Steamhead Member Posts: 17,210
    Not sure of the make, but it's a "wall radiator". Ratings were pretty much standardized. Post the height and width of one of the three sections and we can tell you its rating.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • Danny Scully
    Danny Scully Member Posts: 1,434
    If I had to guess, I’d say it’s roughly 21 EDR. 

    New England SteamWorks
  • jep
    jep Member Posts: 16
    I love seeing such "unique" radiators. Any manufacturer or place of manufacture to be found? What would you suggest as year of manufacture?
    Mad Dog_2
  • Paul_4
    Paul_4 Member Posts: 7

    Thank you all for the comments. I wish I had a manufacturer stamp to share. It would definitely make things easier.

    The sections are 22.5 Wide x 14.5 Tall, So the estimate of 7 SqFt EDR per section is probably close. I estimated at 17.5 SqFt, but 21 is probably closer.

    Cheers!

  • Mad Dog_2
    Mad Dog_2 Member Posts: 7,396

    Close enough for Govt Work...Mad Dog