Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Boiler has code AO1
rafaelb1961
Member Posts: 1
in Gas Heating
My Aquabalance boiler does not reach set temp of 190°. It had a code of AO1. Had to reset boiler.
I did change the Iten 140 ignitor.
What should I be looking for now?
I did change the Iten 140 ignitor.
What should I be looking for now?
0
Comments
-
Hello @rafaelb1961,
Maybe condensate trap blocked ?
https://www.weil-mclain.com/sites/default/files/field-file/AquaBalance-Boiler-Manual-0118-Web.pdf
National - U.S. Gas Boiler 45+ Years Old
Steam 300 SQ. FT. - EDR 347
One Pipe System0 -
Is the gas turned on?
Edward Young Retired
After you make that expensive repair and you still have the same problem, What will you check next?
0 -
National - U.S. Gas Boiler 45+ Years Old
Steam 300 SQ. FT. - EDR 347
One Pipe System1
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements