Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Experience with Munchkin Boiler PC Diagnostics?
drosner
Member Posts: 45
I’m attempting to connect my munchkin boiler to my home automation system for monitoring. These boiler controls have a place to connect to a PC and munchkin provided software for it to run on a laptop at some point. It appears a company called SIT Controls makes these boards and probably the software. I’ve search far and wide and haven’t found any information on this software. I’m working on just trying to read the serial data for now.
Anyone use this software and if so is there anything you need to enable on the board to get it to talk to the laptop? As of now I’m not seeing anything…
Anyone use this software and if so is there anything you need to enable on the board to get it to talk to the laptop? As of now I’m not seeing anything…
0
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 420 Carbon Monoxide Awareness
- 80 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 892 Plumbing
- 5.9K Radiant Heating
- 378 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements